Position: Home > PRODUCTS > Tungsten Carbide Dies
Tungsten Carbide Wire Drawing Dies
Cemented carbide is a hard material used in machining tough materials sud wear away, such as high-quantity production runs.
Most of the time, carbide will leave a better finish on the part, and allow faster machining. Carbide Wire Drawing Die can also withstand higher temperatures than standard high speed steel mould.
Feature
1. wear-resisting: useing GB class A cemented carbide mould core ,wire drawing dies mould core strength over 2200N/mm ³ ,do not crack
2. more wire rod can be drawed: the size area are 20% longer than common mould, which make sure our wire drawing dies can work longer!
3. our die do not get out of steel jacket easily: using advance cold bushing tech, and interference bushing craft, the wire drawing dies are tightening connect with the steel jacket.
Grade List
| Grade | Co (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) | Applications |
| XC100 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2000 | Wire drawing dies for wear-resistance impact-resistance |
| XC101 | 5.8-6.2 | 14.6-15.0 | 91.5-92.5 | 2500 | |
| XC200 | 7.8-8.2 | 14.5-14.9 | 91.0-92.0 | 2100 | |
| XC201 | 7.8-8.2 | 13.5-14.9 | 91.0-92.0 | 2800 | |
| XC300 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 2600 | |
| XC301 | 9.8-10.3 | 14.2-14.6 | 90.5-91.5 | 3200 | |
| XC500 | 14.7-15.3 | 13.9-14.2 | 87.0-88.0 | 2600 | Stamping dies for impact-resistance |
| XC501 | 14.7-15.3 | 13.9-14.2 | 87.0-88.0 | 2800 | |
| XC800 | 19.5-20.5 | 13.4-13.6 | 83.0-84.0 | 2600 | |
| XC8001 | 19.5-20.5 | 13.4-13.6 | 83.0-84.0 | 3000 | |
| XC900 | 23.0-23.5 | 13.1-13.4 | 82.5-83.5 | 2400 | |
| XC901 | 23.0-23.5 | 13.1-13.4 | 82.5-83.5 | 2600 | |
| Grade | Co+Ni (wt%) | Density (g/cm³) | Hardness (HRA) | TRS (≥N/mm²) | Applications |
| XCN61 | 16.0-17.0 | 13.5-14.0 | 83.5-84.5 | 3200 | Stamping dies for High temperature-resistance |
| XCN71 | 17.0-18.0 | 13.3-13.8 | 82.0-83.0 | 3000 |
| Dimension | |||||
| d | l | d1 | h | h1 | ll |
| 8 | 6 | 0.1-1.0 | 0.1-10.6 | 1.0-2.0 | 0.8-1.2 |
| 10 | 8 | 0.1-1.2 | 0.1-0.8 | 1.5-4.0 | 1.0-1.8 |
| 12 | 10 | 0.2-2.0 | 0.1-1.5 | 2.0-5.0 | 1.6-2.5 |
| 14 | 12 | 0.4-2.5 | 0.2-2.0 | 4.0-5.0 | 1.8-2.5 |
| 16 | 13 | 0.5-3.0 | 0.2-2.5 | 4.0-5.5 | 2.0-3.0 |
| 20 | 17 | 1.0-6.0 | 0.6-3.0 | 5.0-8.0 | 2.5-4.0 |
| 25 | 20 | 2.0-8.5 | 1.0-3.5 | 7.0-10.0 | 3.0-4.5 |
| 30 | 24 | 3.5-12.0 | 2.0-4.0 | 8.0-12.0 | 3.0-5.0 |
| Notice: α=8°10° 12° 14°16°18° β=40° 60° 90° γ=60° 75° 90° | |||||
| Dimension | |||||
| ΦD | b | H | α | β | γ |
| 6.0-8.0 | 0..2 | 4.0-6.0 | 10° | 40° | 60° |
| 6.0-8.0 | 0.4-0.8 | 4.0-6.0 | 40° | * | |
| 8.0-22.0 | 0.4-5.7 | 6.0-20.0 | 10°-14° | 40° | |
| 8.0-26.0 | 0.4-8.0 | 6.0-16.0 | 16° | 40° | |
| 30.0-140.0 | 3.7-84.0 | 21.0-50.0 | 14°-20° | * | |
| Dimension | |||||
| ΦD | Φd | H | α | γ | R |
| 16.0-110.0 | 2.0-60.0 | 14-52 | 3° | 60° | 40 |
| 16.0-110.0 | 20.0-62.0 | 35-45 | 4° | 15.0-40.0 | |
| 16.0-110.0 | 2.8-88.0 | 13-50 | 24° | 3.0-10.0 | |
| 16.0-110.0 | 20.0-70.0 | 32-55 | * | 3.0-40.0 | |
| Dimension | |||||
| d | l | A | h | h1 | ll |
| 16 | 12 | 1.5-2.5 | 0.5-1.5 | 4.0-6.0 | 1.0-2.0 |
| 22 | 18 | 2.0-4.0 | 1.0-2.0 | 5.5-9.0 | 1.5-2.5 |
| 30 | 21 | 3.5-7.0 | 1.5-2.5 | 8.0-12.0 | 1.5-2.5 |
| 35 | 25 | 6.5-10.0 | 2.5-3.5 | 10.0-14.0 | 2.0-4.0 |
| 45 | 25 | 8.0-15.0 | 3.0-4.0 | 10.0-14.0 | 2.0-4.0 |
| 50 | 28 | 12.0-20.0 | 3.5-4.5 | 12.0-16.0 | 2.0-4.0 |
| 60 | 30 | 18.0-25.0 | 4.0-5.5 | 12.0-16.0 | 3.0-5.0 |
| 65 | 32 | 22.0-30.0 | 5.0-7.0 | 12.0-16.0 | 4.0-6.0 |
| 70 | 35 | 26.0-35.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 80 | 35 | 30.0-40.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 90 | 40 | 35.0-45.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 100 | 40 | 40.0-50.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| 120 | 45 | 45.0-55.0 | 6.0-9.0 | 14.0-18.0 | 5.0-7.0 |
| Note:α=14° 16° 20° β=40° γ=60° | |||||
| Dimension | ||||||
| d | l | A | B | h | h1 | ll |
| 20 | 12 | 1.5-3.5 | 0.5-1.5 | 1.5-2.5 | 3.0-5.0 | 1.5-2.5 |
| 22 | 12 | 3.0-5.0 | 0.5-2.0 | 1.5-2.5 | 3.0-5.0 | 1.5-2.5 |
| 25 | 15 | 3.5-7.0 | 0.5-4.0 | 2.0-3.0 | 4.0-6.0 | 2.0-3.0 |
| 32 | 16 | 5.0-9.0 | 1.5-4.0 | 2.0-3.0 | 4.0-6.0 | |
| 35 | 18 | 7.0-12.0 | 1.0-6.0 | 2.0-3.0 | 5.0-8.0 | 2.0-3.0 |
| 25 | 7.0-12.0 | 2.0-8.0 | 2.5-3.5 | 7.0-13.0 | 2.5-3.5 | |
| 45 | 20 | 10.0-15.0 | 1.0-7.0 | 2.5-3.5 | 5.0-8.0 | 2.5-3.5 |
| 25 | 10.0-15.0 | 4.0-10.0 | 3.0-4.0 | 7.0-14.0 | 2.5-3.5 | |
| 50 | 20 | 12.0-24.0 | 1.0-8.0 | 2.5-3.5 | 5.0-96.0 | 2.5-3.5 |
| 28 | 12.0-24.0 | 6.0-16.0 | 3.0-4.0 | 8.0-15.0 | 2.5-3.5 | |
| 60 | 20 | 18.0-32.0 | 1.0-9.0 | 2.5-4.0 | 5.0-10.0 | 2.5-3.5 |
| 30 | 18.0-32.0 | 7.0-16.0 | 4.0-6.0 | 8.0-16.0 | 3.0-5.0 | |
| Note: α=° 14°18° β=40° 60° γ=60° | ||||||
| Dimension | |||||
| d | l | d1 | h | h1 | R |
| 30 | 18 | 10.0-18.0 | 5.0-10.0 | 1.0-2.0 | 30 |
| 50 | 32 | 16.00-24.0 | 9.0-14.0 | 1.5-2.5 | 30 |
| 60 | 35 | 22.0-30.0 | 9.0-14.0 | 1.5-2.5 | 30 |
| 70 | 42 | 28.0-36.0 | 12.0-18.0 | 2.0-3.0 | 35 |
| 75 | 42 | 34.0-42.0 | 12.0-18.0 | 2.0-3.0 | 35 |
| 85 | 45 | 40.0-48.0 | 12.0-18.0 | 2.5-3.5 | 40 |
| 100 | 50 | 46.0-56.0 | 16.0-22.0 | 2.5-3.5 | 40 |
| 110 | 50 | 54.0-64.0 | 16.0-22.0 | 2.5-3.5 | 40 |
| 125 | 55 | 62.0-72.0 | 16.0-22.0 | 2.5-3.5 | 40 |
| Note: γ=60° | |||||
English
